Vouchers  |  Jobs  |  Property  |  Motors  |  Travel  |  Dating  |  Family Notices

When to Install Steel Reinforcing Cleator Moor

Procedures for constructing reinforced concrete masonry walls in Cleator Moor will vary depending on local practices, the amount of reinforcing, and building size or type. One common method in lightly reinforced masonry walls is to install the reinforcing bars and grout the masonry walls after the walls are complete.

R J Gardner - Builder
01946 817552
24 Todholes Road
Cleator Moor
 
Bob Watson
01946 811670
9 Leconfield Street
Cleator Moor
 
David Mingins Joinery
01946 817318
47 Todholes road
Cleator Moor
 
Carter Plant Hire
01946 811357
29 Penzance Street
Moor Row
 
C M B Properties Ltd
01946 813441
Keekle Estate Office
Cleator Moor
 
Alfred Mcalpine Homes Cumbria Ltd
01946 811153
Threaplands
Cleator Moor
 
Travis Perkins
01946 811553
Leconfield Estate
Cleator Moor
 
R J Gardner Builder
01946 817552
24 Todholes Road
Cleator Moor
 
K J Solutions
01946 810646
25 Church St
Whitehaven
 
Reinforced Concrete
01946 814216
30 Coniston Park
Cleator Moor
 

When to Install Steel Reinforcing

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 1999

Should steel reinforcing be installed before the masonry is laid up or after the walls are complete? If the steel is installed first, do you thread the CMU over the bars as they are laid?

Procedures for constructing reinforced concrete masonry walls will vary depending on local practices, the amount of reinforcing, and building size or type. One common method in lightly reinforced masonry walls is to install the reinforcing bars and grout the masonry walls after the walls are complete. The Masonry Standards Joint Committee specification (ACI 530/ASCE 5/TMS 402) allows grout pours of 24 feet in height when the grouted cell is 3 by 3 inches for fine grout and 3 by 4 inches for coarse grout defined in ASTM C476. The grout pour will be made up with several grout lifts not exceeding 5 feet each. Therefore, by code, a 24-foot-high concrete masonry wall can be built before the reinforcing is installed. In some parts of the country, especially in heavily reinforced walls, the reinforcing bars may be positioned before the wall is built. In this case the wall would be constructed using "A" or "H" concrete masonry units. An "A-block" is a hollow concrete masonry unit with one end closed and the opposite end open. It is sometimes referred to as a "single open end block." The "H-block" is open on both ends. These units can be used to build the wall without having to string the unit over the bar from the top.

Click here to read full article from Masonry Construction